What We Do — And What We Don't

Garage Floor Coating Services

One specialty. Two decades of mastery. Polyaspartic full flake systems built for Arizona's climate and your garage's daily demands.

Owner on Every Job Licensed Since 2004 No Subcontractors No Nonsense Warranty
Premium Garage Floor Coatings Since 2004

One Category. Done Exceptionally Well.

RX Garage offers one category of service: garage floor coatings. We've done it since 2004, and we do it well. No patios. No pool decks. No driveways. No metallics. That's not a limitation — it's a deliberate choice that produces better outcomes for every client we work with.

Every process, product selection, and skill developed over 20+ years is focused entirely on garage floors. That focus is evident in the work — and in the floors that still look exceptional years after installation.

20+Years in Business
500+Installs Completed
100%Owner on Every Job
0Subcontractors Used
ROC#330488 Licensed
Our Services

What We Install — In Detail

Polyaspartic Full Flake System

Our flagship offering. A multi-layer installation that starts with proper concrete preparation and finishes with a durable, UV-stable polyaspartic topcoat. The right choice for Arizona's climate — cures fast, handles extreme heat without peeling or bubbling, resists oils and chemicals.

  • Full chip/flake broadcast — edge to edge
  • 35+ color blends available
  • UV-stable — won't yellow in Arizona sun
  • Chemical and stain resistant
  • Low maintenance — easy to clean
  • Covered by No Nonsense Warranty
🔒
Moisture Vapor Blocking Epoxy Primer

Every RX Garage installation begins here — and this is where most competitors cut corners. Our MVB epoxy primer does two critical things: creates the mechanical bond the topcoat depends on, and blocks moisture vapor migrating up through the concrete slab.

  • Penetrating formula — bonds chemically to concrete
  • Stops moisture vapor transmission
  • Prevents delamination from below
  • Applied over properly ground surface only
  • Manufacturer relationship since 2006
  • The foundation of a floor that lasts
⚙️
Surface Preparation & Concrete Grinding

Surface preparation is where most inferior coatings fail before they're even installed. Inadequate prep is the leading cause of peeling and delamination — not the coating itself. We use diamond grinding to open the concrete surface profile and create the substrate the system requires.

  • Diamond grinding — not acid wash
  • Removes existing sealers and contaminants
  • Opens proper surface profile for adhesion
  • Crack patching and repair included
  • No shortcuts on this step — ever
  • The difference between a floor that lasts and one that doesn't
🎨
Color & Finish Selection

Our full flake system is available in a curated selection of color blends suited to the aesthetic standards of the homes we work in. We bring samples to your consultation so you can see how colors look in your actual space and lighting — not just on a screen.

  • 35+ color blends available
  • Neutral desert palettes, modern grays, bold finishes
  • Low-sheen or high-gloss topcoat — your choice
  • Samples brought to consultation
  • Guidance based on vehicles, cabinetry, aesthetic
  • Consistent broadcast — no thin spots or gaps
What We Don't Do — And Why That Matters

We don't coat patios, pool decks, driveways, or offer metallic epoxy systems. This isn't an oversight — it's a deliberate choice. If a contractor offers to coat your patio and your garage floor in the same visit, that's their business model. Ours is different. Specialization produces better outcomes, and 20+ years focused exclusively on garage floors shows in the quality of every installation we do.

✗ No patios ✗ No pool decks ✗ No driveways ✗ No metallic epoxy ✗ No subcontractors ✓ Garage floors — done right
Installation Process

How Every RX Garage Job Gets Done

01
Grind & Repair — Day 1

Diamond grinding to proper surface profile. Crack repairs made. No acid wash — proper mechanical prep every time.

02
MVB Epoxy + Flake — Day 1

Moisture vapor blocking epoxy basecoat applied. Full flake broadcast edge-to-edge while wet.

03
Floor Prep for Sealer — Day 2

Basecoat cures overnight. Floor prepped and cleaned for final sealer application.

04
Polyaspartic Sealer — Day 2

UV-stable polyaspartic topcoat applied. Built for Arizona heat. Backed by No Nonsense Warranty.

Where We Work

Service Areas

Client Reviews

The Work Speaks for Itself

★★★★★

"The prep work was unlike anything I'd seen — proper diamond grinding, vapor primer, the full process. Nothing was cut short. Three years later and the floor still looks brand new."

Richard M.
Grayhawk, Scottsdale
★★★★★

"Had another company coat our previous home's floor and it failed within two years. RX Garage explained exactly why — improper prep and no vapor barrier. Their system is completely different. Four years in and it's perfect."

Sandra L.
Rio Verde Highlands
★★★★★

"I store collector cars and needed a floor that looked as good as the vehicles on it. The result is showroom quality. The owner took the time to understand exactly what I wanted and delivered."

Thomas B.
Troon, North Scottsdale
Common Questions

Frequently Asked Questions

Polyaspartic is a newer-generation coating that outperforms standard epoxy in nearly every category for Arizona's climate. It cures faster, tolerates extreme heat, resists UV yellowing, and is more chemically resistant. We use polyaspartic as a topcoat over our moisture vapor blocking epoxy primer — giving you the adhesion and vapor protection of epoxy with the durability of polyaspartic.
Inadequate prep is the leading cause of coating failure — not the coating itself. Without proper diamond grinding, the coating has nothing to bond to. Without a vapor primer, moisture migrates up through the slab and causes delamination from below. We never skip or rush these steps — they're the foundation of everything.
Most two-car garages take two days. Day one: grind, crack repairs, MVB epoxy basecoat, full flake broadcast. Day two: prep the floor and apply polyaspartic topcoat. We'll give you a specific timeline during your consultation.
Our No Nonsense Warranty covers both product and labor. The owner stands behind every installation personally. If there's ever a product or adhesion failure related to our work, we'll make it right.
No. We specialize exclusively in garage floors. This is a deliberate choice — not a limitation. Specialization over 20+ years produces better outcomes for our clients than a generalist approach.

Ready to Get Started?

Get a free quote for your garage. The owner answers the phone personally — no call centers, no runaround.

Open 7 days a week · 7am – 5pm · ROC #330488 · Fountain Hills, AZ 85268

Scroll to Top